Canon X-07 User Manual Download

Page: 80 / 149

2 . Thermal Printer (X-711)

This is a compact thermal printer which is used to print out program lists and
results of calculations.

Specifications
System

Printing

Thermal printer
10 characters/line (large), 20 characters/line

(standard), 35 characters/line (small)

Printing speed 20 characters/second
Paper

Exclusive 57 mm width thermal roll paper

Batteries

Ni·Cd

Dimensions

194.5(W)

30(H)

87.5(D)mm

Weight

420g.

Utility cards

Inside the compact cards, the size of a credit card, there are 8K byte ROM or

RAM  (planned).  4K  memory cards  (4K RAM cards) have a lithium battery for
back-up power.  Therefore,  their  contents  are retained even when they are
taken  out  of the

X-07.

Application cards (ROM cards) are available as mask

ROM for each type of application. CANON program cards
(ROM/RAM cards) which incorporate both ROM and RAM are also

available.

Summary of Contents for X-07






















































































































































Search results

Summary of Contents for X-07

Reviews:

Related manuals for X-07

Brands by name

Popular brands

Canon X-07, User Manual

Search results

Summary of Contents for X-07

Reviews:

Related manuals for X-07

Brands by name

Popular brands