Canon X-07 User Manual Download Page 58

Page: 58 / 149

"REC" button. The cassette recrder starts recording as soon as the CSA VE

command is executed, and stops recording automatically when a program is

saved.
There are cassette recorders which cannot fast forward or rewind the tape when
it is in the REMOTE mode. In such a case, the MOTOR command is quite
useful.

When,

MOTOR ON

is typed, the tape can be rewound or fast forwarded even when the REMOTE

jack is connected. In other words, the REMOTE mode is canceled when this

command is executed. After fast forwarding or rewinding the tape to the
desired position, return to the REMOTE mode by typing,

MOTOR OFF

and,

CSAVE "FILE"

Once the program has been saved, the cassette recorder is automatically

stopped, and the cursor is displayed on the LCD.

Summary of Contents for X-07






















































































































































Search results

Summary of Contents for X-07

Reviews:

Related manuals for X-07

Brands by name

Popular brands

Canon X-07, User Manual

Search results

Summary of Contents for X-07

Reviews:

Related manuals for X-07

Brands by name

Popular brands