Canon WUX6000 User Manual Download Page 33

Page: 33 / 236

Part Names

Be
fo

Us
e

Press

D.SHIFT/KEYSTONE

to correct

keystone distortion.

• Moves the image up, down, left, or right

when the screen aspect setting is [16:9 D.
image shift] or [4:3 D. image shift] is
selected. (

P50

P51

)

• To move the image, use the

[ ] / [ ]

or the

[ ] / [ ]

buttons.

(5) D.ZOOM button (

P64

)

Zooms the image in or out digitally.
[+] button:

Zooms the image in (up to 12x).

[–] button:

Zooms the image out (1x minimum).

[ ] / [ ] / [ ] / [ ] buttons:

Move the zoom-in location.

(6) FREEZE button (

P62

)

Freezes the projected image.

(7) IMAGE button (

P57

)

Switches the image mode (image
quality).

(8) INPUT button (

P40

)

Switches the input signal.

(9) LENS-SHIFT button (

P46

)

Moves the lens up, down, left, or right.
[ ] / [ ] / [ ] / [ ] buttons:

Moves the image.

(10) ZOOM button (

P45

)

Adjusts the image size.
[ ] / [ ] buttons:

Increase the image size.

[ ] / [ ] buttons:

Decrease the image size.

(11) AUTO PC button (

P43

)

Adjusts tracking etc. automatically in
accordance with the signal from a
computer when the analog PC input is
selected.

(12) OK button (

P73

)

Determines the item selected from the
menu.

(13) Pointer buttons (

P73

)

Selects the upper, lower, left or right
item in the menu. Also used to assign a
channel to the remote control. (

P102

)

(14) MENU button (

P72

)

Displays a menu on the screen. Also
used to assign a channel to the remote
control. (

P102

)

(15) VOL button (

P63

)

Adjust the sound volume.
[+] button:

Increases the volume.

[–] button:

Decreases the volume.

(16) P-TIMER button

Cannot be used on this projector.

(17) MUTE button (

P63

)

Mutes the sound.

(18) BLANK button (

P62

)

Toggles between display / non-display
of image.

(19) LAMP button (

P95

)

Displays the power saver settings
screen, where you can adjust the lamp
mode (Full power / Power saver) (

P95

set the power management (

P98

) and

specify the network standby settings
(

P167

(20) GAMMA button (

P87

)

Adjusts the gamma of the image.
[ ] button:

Corrects dark parts of the image
so that they are easier to see.

[ ] button:

Corrects bright parts of the image
so that they are easier to see.

Summary of Contents for WUX6000













































































































































































































































Search results

Summary of Contents for WUX6000

Reviews:

Brands by name

Popular brands

Canon WUX6000, User Manual

Search results

Summary of Contents for WUX6000

Reviews:

Brands by name

Popular brands