manualshive.com logo in svg

Canon WUX6000, User Manual

Share
Download
Canon WUX6000 User Manual Download Page 119

Installation Procedure

119

Inst
alla
tio

n

 an
d Main

te

nan
ce

Inst
allation

■

Ceiling Mounting or Rear Projection

You can mount the projector on the ceiling (ceiling mounting) with it turned upside 
down or place it behind the screen (rear projection) if you use a translucent screen.

Make sure to use the optional ceiling attachment. For the ceiling attachment, refer 
to “Option” (

P227

). For details, refer to the assembly and installation manual 

provided with the ceiling attachment.

Ceiling mounting

Rear projection

Mounting the Projector on the 
Ceiling

You can mount the projector on the 
ceiling.
The ceiling attachment (part No.: RS-
CL11) is required in order to mount the 
projector on the ceiling. Depending on 
the installation environment, an 
extension pipe (part No.: RS-CL08 or 
RS-CL09) may also be required. 
Contact the Canon Customer Support 
Center for more detailed information.

If you mount the projector on the 
ceiling, you have to invert the 
projected image by selecting [Image 
flip H/V] from the menu. (

P141

)

• Make sure to use the optional 

ceiling attachment.

• You should never install the 

ceiling attachment by yourself.

Summary of Contents for WUX6000













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands