113
Menu Description
Advanced
Guid
e
Menu Description
Detailed settings (wired)
> [Network settings] >
[Detailed settings (wired)]
Display and manually change the wired IP address, gateway address, and other
settings. Available only when wired networking is [On].
Menu
Function
IP address
Wired IP address of the projector.
Gateway address
Wired gateway address of the projector.
MAC address
Wired MAC address of the projector.
DHCP
TCP/IP settings
Change or specify the IP address, subnet mask, and gateway address
used for connections.
Submenu
Function
Off
Disables the DHCP function. TCP/IP settings can be
configured.
On
Enables the DHCP function. Searches the DHCP
server. There is no need to configure TCP/IP settings
(IP address, subnet mask, and gateway address),
because the IP address is acquired from the DHCP
server.
• Not required when [DHCP] (
• If an invalid value is entered, the message “Invalid entry”
appears. If this occurs, enter a valid value.
• When [Network (wired/wireless)] is set to [On/On (Pj AP)],
“Cannot set identical segment IP” is displayed if you specify
the same subnetwork as in PJ AP mode. Change the setting
to a different subnetwork, or change [Network (wired/
wireless)] to [On/Off] before entering the wired IP address
again.
Summary of Contents for WUX500
Page 36: ...36 ...
Page 156: ...156 ...