38
IP Filter
If you click IP Filter on the left menu, the page below is displayed.
In this page, you can allow or deny communication with this product
from a range of registered IP addresses.
[Set access filter mode]
[Filter 1 to Filter 4 ]
Name
Details
Default Value
Filter Mode
Set the IP address access filter.
The devices that access this device
can be restricted with ranges of IP
addresses specified in IP filters 1
to 4.
• ALLOW
Allows access to this product
from the set IP address ranges.
• DENY
Denies access to this product
from the set IP address ranges.
DENY
Name
Details
Default Value
IP Address
/ Address
Mask
Set the IP filter range by setting the
IP addresses and address
masks.You can set up to four
ranges of IP addresses to be
filtered. If this setting is not
necessary, enter “0.0.0.0” for the IP
addresses and address masks.
Examples: IP Address / Address
Mask: Setting range
• 0.0.0.0 / 0.0.0.0: Not set
• 192.168.0.0 / 255.255.255.0:
192.168.0.0 to 192.168.0.255
• 192.168.0.1 / 255.255.255.255 :
192.168.0.1 only
0.0.0.0
Summary of Contents for WU10
Page 55: ...55 ...
