21
1
Following the Connection Wizard
Basic Network Settings
[Enter connection] and [Search again]
To configure settings for the wireless LAN device manually, select [
Enter connection
] and
press <
0
>. Complete the settings for the items displayed, one after another.
To search for wireless LAN devices again, select [
Search again
] and press <
0
>.
Next, enter the encryption key of the wireless LAN device. For details on the encryption key,
refer to the device’s instruction manual.
Note that the screens displayed in steps 1 to 3 below vary depending on the authentication and
encryption of the wireless LAN device.
1
The [
Key index
] screen is displayed only if WEP
encryption is used by the wireless LAN device.
Turn the <
5
> dial to select the key index number
specified as the access point, and then press
<
0
>.
Select [
OK
] and press <
0
> to go to the next
screen.
2
Turn the <
5
> dial to select the key format, and
then press <
0
>.
Select [
OK
] and press <
0
> to go to the next
screen.
3
Enter the encryption key.
To switch between input areas, press the <
JUMP
>
button.
To move the cursor, turn the <
5
> dial.
In the bottom input area, turn the <
5
> dial and
press <
0
> to enter the encryption key.
If you make a mistake, press the <
L
> button to
erase it.
Press the <
7
> button to go to the next screen.
To return to the previous screen, press the
<
6
> button. The entry is erased.
Entering the Wireless LAN Encryption Key
COP
Y
Summary of Contents for WFT-E3
