Canon w-e1, Instruction Manual

Page: 61 / 98

61
Using EOS Utility
On the [
D
Wi-Fi on] screen,
select [Disconnect,exit].

If the [
D
Wi-Fi on ] screen is not
displayed, select [ Wi-Fi function ]
under the [
5
3 ] tab.

Select [ Disconnect,exit ], then select
[ OK ] on the confirmation dialog to
terminate the connection.
Terminating the Connection

While connected, movie shooting is not possible.

While connected, the following operations cannot be performed:
Multiple exposures, interval timer, RAW image processing, resizing,
movie editing, image transfer by camera operation,
cropping (EOS 5DS, EOS 5DS R)

In remote shooting, the AF speed may become slower.

Depending on the transmission range and connection status, image
display may be delayed, images may not be displayed smoothly, or
shutter release timing may be delayed.

In Remote Live View shooting, the rate of image transmission is slower
compared to a connection via an interface cable. Therefore, moving
subjects cannot be displayed smoothly.

While connected, battery power is consumed. If you will not use the
wireless communication functions for a prolonged period, terminate the
connection.

The wireless connection will also be terminated if you set the camera’s
power to <
2
> or open the card slot cover or battery compartment
cover.

If the camera’s auto power off is activated while connected, the
connection will be terminated. If necessary, set [
5
2: Auto power off ] to
[ Disable ]. To continue to use EOS Utility, perform the reconnection
procedure (p.64).