Canon VK-16, Setting Manual

Page: 90 / 142

90
If the before event and after event fields are set to 0 seconds,
video will still be recorded while motion is detected.
Note
Configure Motion and Sensor Settings
Click OK to save the new settings and close the dialog.
Click Cancel to discard the new settings.
●
Available external outputs depend on the Camera Server.
●
Certain Camera Servers have features to allow image capture
operations based on sensor input or schedule. If settings are
enabled on such a Camera Server, they take precedence over
any settings made in VK-64/VK-16. This may cause some
confusion if your VK-64/VK-16 recording schedules fail to
record with the correct camera preset. You should disable
such Camera Server features when using VK-64/VK-16 to
record images.
Note
Refer to the “Administrator’s Manual” for important information
on Camera Server-based motion detection.
Tip