Canon VK-16, Setting Manual

Page: 34 / 142

34
Adding and Editing Users
The Storage Server Configuration dialog, User Management tab allows you to set up
users and their privileges. Administrators have access to the Viewer including Camera
Server setup, recording schedules and Viewer setup. Operators only have access to live
video and recorded video on Storage Servers they have permission to access.
The User Management tab is laid out in the following manner:
●
Users list - Lists all users who can access the Storage Server.
●
Add / Edit / Remove - Allows you to add users, edit passwords and remove users.
Setting up Users
Tick to enable user to have
Administrator privileges
(full access to configuration functions).
If the Authentication is required
when starting this tool. box is
checked, the Login dialog opens.
Use Add to add users to this field.
There is no limit to the number of users
you can add.
Click Apply to save changes.
●
Users who have Operator status cannot configure, register
and change Camera Servers, or configure and change
recording schedules.
●
By default, a user called “admin” is created. The password is
“NVR”. It is strongly recommended that this is changed after
installation.
●
It is necessary to set up users on all Storage Servers. A
particular user should be set up to have the same password
on each Storage Server.
Note