background image

172 

Š

 

Additional Information

After using the camcorder for a long time, it becomes hot.

- The camcorder may become hot after using it continuously for long periods of time; this is not 

a malfunction. If the camcorder becomes unusually hot or it becomes hot after using it only 
for a short while, it may indicate a problem with the camcorder. Consult a Canon Service Cen-
ter.

Playback

Cannot add scenes to the playlist.

- The playlist can contain a maximum of 999 scenes. If the playlist includes scenes recorded in 

MXP or FXP mode, the maximum number of scenes in the playlist may be less than 999.

- You may not be able to add to the playlist scenes recorded or edited using another device.
- The memory is full. Delete some recordings (

0

59, 108) or initialize the memory (

0

42) to 

free some space.

Cannot move scenes in the playlist.

- The memory is full. Delete some recordings (

0

59, 108) or initialize the memory (

0

42) to 

free some space.

Cannot delete a scene.

- You may not be able to delete scenes recorded or edited using another device.

Deleting scenes takes longer than usual.

- When the memory contains a large number of scenes, some operations may take longer than 

usual. Save your recordings (

0

134) and initialize the memory (

0

42).

Cannot delete a photo.

- The photo is protected. Remove the protection (

0

120).

Cannot capture a video snapshot scene from a movie.

- You cannot capture video snapshot scenes from scenes recorded or edited using another 

device.

- The memory is full. Delete some recordings (

0

59, 108) or initialize the memory (

0

42) to 

free some space.

When playing back scenes/slideshow with background music, the music track is not played 
back correctly.

- This can occur when you transfer the music files to a memory after repeatedly recording and 

deleting scenes (fragmented memory). Save your recordings (

0

134) and initialize the 

memory (

0

42). Then, transfer the music files first and only then write the video files back 

to the memory.

- Music tracks will not play back correctly if the connection was interrupted while transferring 

the music files. Delete the music tracks and transfer the music files again.

- The transfer rate of the memory card used is too slow. Use a recommended memory card 

(

0

37).

COP

Y

Summary of Contents for VIXIA HF S30





















































































































































































































Reviews: