Troubleshooting
161
Do not disconnect the power source. Cannot write data with this connection. To write data to
the camcorder, connect the compact power adapter then reconnect the camcorder and
computer. Do not disconnect the USB cable unless you first use the computer to safely end
the connection.
- The camcorder cannot be operated while it is not being powered by the compact power
adapter and is connected to a computer with the supplied USB cable. In addition, scenes
cannot be written back and music files cannot be transferred to the camcorder. To avoid
corrupting the data in the camcorder’s memory, use the computer’s Safely Remove Hardware
function to end the connection and disconnect the USB cable before using the camcorder.
- To be able to write back scenes and to transfer music files to the camcorder, use the
computer’s Safely Remove Hardware function to end the connection, disconnect the USB
cable, power the camcorder using the compact power adapter and only then connect it to the
computer again.
Do not disconnect the power source. Do not disconnect the USB cable unless you first use
the computer to safely end the connection.
- When the camcorder is in
mode and is connected to the computer with the supplied USB
cable, the camcorder cannot be operated. Disconnecting the USB cable or power source while
this message appears may result in permanent loss of the recordings in the camcorder. Use the
computer's Safely Remove Hardware function to end the connection and disconnect the USB
cable before using the camcorder.
- To be able to write back scenes and to transfer music files to the camcorder, power the
camcorder using the compact power adapter and only then connect it to the computer using
the supplied USB cable.
Error writing on the memory card. Data may be recovered if the memory card has not been
removed. Attempt recovering the data?
- This message will appear the next time you turn on the camcorder if power supply was
accidentally interrupted while the camcorder was writing on the memory card. Select [Recover]
to try to recover the recordings. If you removed the memory card and used it with another
device after this happened, we recommend you select [Give Up].
File name error
- The folder and file numbers have reached their maximum value. Set
8
[Photo Numbering] to [Reset] and delete all the photos on the memory card (
0
123) or
initialize it (
0
36).
Initialize only using the camcorder
- There is a problem with the file system that prevents accessing the selected memory. Initialize
the memory with this camcorder (
0
36).
LCD Screen has been dimmed
- Hold
h
pressed for 2 seconds to restore the LCD screen to its previous brightness setting.
May not be possible to record movies on this memory card
- You may not be able to record movies on a memory card without a Speed Class rating.
Replace the memory card with one rated SD Speed Class 2, 4, 6 or 10.
Mem. Card Number of scenes already at maximum
- The memory card already contains the maximum number of scenes (3,999 scenes); no further
scenes can be copied onto the memory card. Delete some scenes (
0
91) to free some space.
Mem. Card Unable to recognize the data
- The memory card contains scenes recorded using a video configuration that is not supported
(PAL or SECAM). Play back the recordings in the memory card with the device originally used
to record them.
Memory card cover is open
- After inserting a memory card, close the double memory card slot cover.