Canon varioPRINT 110, Operation Manual

Page: 217 / 454

Copy or Scan Originals Using the ADF
Introduction
Use the ADF to copy or scan a set of up to 300 originals. The scanner automatically feeds the
originals to the glass plate and scans them. Two-sided originals can be scanned as two-sided
documents.
Do not place the following types of originals into the ADF:
• Thin originals, when the scanner is located in an environment with high temperatures or high
humidity.
• Torn originals or originals with large binding holes.
• Severely curled originals or originals with sharp folds.
• Clipped or stapled originals.
• Carbon backed paper.
• Transparencies and other highly transparent originals.
• Any other originals which may not feed smoothly.
NOTE
Always smooth out any folds in your originals before placing them into the ADF.
Copy originals in the ADF
Step Action Illustration
1 Adjust the paper guides to fit the size of
your originals.
2 Neatly place your originals with the side
to be copied face up into the originals
tray.
Place your originals as far into the ADF as
possible until the originals indicator is lit.
3 Define the copy or scan settings on the
control panel, and touch [Start] .
4 When scanning is complete, remove the
originals from the original output area to
avoid paper jams.
Copy or Scan Originals Using the ADF
216 Chapter 7 - Carry Out Copy Jobs
Canon varioPRINT 135 Series