Canon varioPRINT 110 Operation Manual Download Page 18

Page: 18 / 454

Item

Component

Function

First High Capacity Stacker-
E1 or High Capacity Stack-
er-F1 (not illustrated)

Receive the output.
Capacity of High Capacity Stacker-E1:
• Output tray: 1,000 sheets.
• Stack trays (total): 10,000 sheets A4/LTR or 5,000

sheets A3/LGL.

Capacity of High Capacity Stacker-F1:
• Top tray: 200 sheets.
• Stack tray and eject tray (total): 6,000 sheets

A4/LTR/A3/LGL or 355 mm (14.0") in height.

NOTE

High Capacity Stacker-E1 and High Capacity
Stacker-F1 cannot be combined.

Second High Capacity
Stacker-E1 or High Capaci-
ty Stacker-F1 (not illustra-
ted)

Add additional output capacity.

Perfect Binder-C1

Create perfect-bound books.

Paper Folding Unit-F1

Fold the output in various ways.

Finisher-AF1/Saddle Finish-
er-AF2 or Finisher-AK1/
Saddle Finisher-AK2

Staple and stack the output. Optional, the stacker/stapler
can be equipped with a Puncher Unit-Bx1 to punch the
output.

Booklet Trimmer-D1

Trim the fore-edge of each booklet.

Two-Knife Booklet Trim-
mer-A1

Trim the top and bottom of each booklet.

Overview of the varioPRINT 135 Series Including Accessories

Chapter 2 - Main Parts

Canon varioPRINT 135 Series

Summary of Contents for varioPRINT 110







































































































































































































































































































































































































































































Search results

Summary of Contents for varioPRINT 110

Reviews:

Related manuals for varioPRINT 110

Brands by name

Popular brands

Canon varioPRINT 110, Operation Manual

Search results

Summary of Contents for varioPRINT 110

Reviews:

Related manuals for varioPRINT 110

Brands by name

Popular brands