BT1-D005-A-ENG
©2022.04
CANON
INC.
16/20
Setting - <Setting> - <Iris> - Close
7.3
Setting iris closure detection on/off
This iris cannot be closed when an extender (2.0×) is inserted
with iris compensation set to on. As a recourse, you can set this
function, which does close the iris when iris closure is detected.
Iris screen
I G : 5 0
<Iris>
[ I-Gain ]
Comp:
ON
Close:
OFF
* Iris closure detection takes
effect and this menu item
is shown when [Comp] (iris
compensation) is set to on.
× 3
I G : 5 0
<Iris>
[ I-Gain ]
Comp:
ON
Close:
OFF
to select
Note
Depending on the camera, correct iris operation may not be possible due to interaction
between lens iris compensation and camera iris control. In this case, set iris closure
detection to off.
Selection item
ON
OFF
Function
Iris closure detection
No iris closure detection
Default value: Set at the factory before shipment to suit the camera interface.
Setting - <Setting> - <IS>
8. Accessing the IS screen
(IS models only)
Moves to a screen for configuring a variety of IS settings.
Setting screen
I G : 5 0
<Setting>
I-Gain:
RBF:
System
50
000
× 8
I G : 5 0
<Setting>
Iris
IS
Reset All
IS screen
I G : 5 0
<IS>
Mech.Lock :
SwSetting: Alt
OffState:
OFF
OFF
Setting - <Setting> - <IS> - Mech.Lock
8.1 IS mechanical lock setting
(IS models only)
IS can be forcibly locked during shooting.
IS screen
I G : 5 0
<IS>
Mech.Lock :
SwSetting: Alt
OffState:
OFF
OFF
I G : 5 0
<IS>
Mech.Lock :
SwSetting: Alt
OffState:
OFF
OFF
to select
Selection item
(D)
OFF
ON
Function
Disables IS mechanical
lock
Enables IS mechanical
lock
(D): Default value
Setting
