BT1-D005-A-ENG
©2022.04
CANON
INC.
9/20
Setting - <Setting> - <System> - LensCode
3.7 Setting the lens code
After you assign a number (code) to the lens, it can be sent to
the camera. Choose from 16 different codes in binary format,
0000–1111.
Depending on camera functions, these codes may be used to
enable cameras to identify lenses.
Set if instructed to do so by the camera manufacturer.
System screen
I G : 5 0
<System>
Indicator:
Tally:
Cafs:
ON
ON
ON
× 7
I G : 5 0
<System>
62
CamSeri:
TalBrtness:
ON
LensCode:
0000
to adjust
Note
• 16 different codes in binary format are shown as you cycle through the setting option.
• The lens code remains the same if settings are reset.
Selection item
0000
–
1111
Default value: Set at the factory before shipment.
Setting - <Setting> - <System> - TalBrtness
3.6 Setting tally brightness
System screen
I G : 5 0
<System>
Indicator:
Tally:
Cafs:
ON
ON
ON
× 6
I G : 5 0
<System>
62
CamSeri:
TalBrtness:
OFF
ON
LensCode: 0000
to adjust
Selection item
01
–
99
Function
Dimmest
Brightest
Default value: 62
Setting - <Setting> - <System> - CamSeri
3.5 Enabling/disabling camera
serial communication
Auto recognition of the camera-lens interface can be enabled or
disabled (analog control).
System screen
I G : 5 0
<System>
Indicator:
Tally:
Cafs:
ON
ON
ON
× 5
I G : 5 0
<System>
OFF
VR-Out:
62
CamSeri:
TalBrtness:
OFF
ON
to select
Selection item
(D)
ON
OFF
Function
Enabled
Disabled
(D): Default value
Setting
