Canon UFRII LT PRINTER KIT-J2, Service Manual

Page: 23 / 34

Chapter 2
2-1
2.1 New Function
2.1.1 Special function to thin line
0011-1140
Special function to thin line
In the process of resolution change from original to printer driver, some of 1 dots may be omitted. In this case, the faulty occurs, for instance, a continuous line is
printed as a dotted line.
Use conditions:
The memory of the iR main body should be upgraded to 256MB in order to select this function.
This function uses a method that 1 dot is drawn as 2 dots by the setting on the printer driver, and that can prevent image losses.
The memory should be set to 256 MB in options on the printer driver.
The resolution in the printing quality on the printer driver should be set to 1200 dpi.
Special function to thin line in the finishing on the printer driver should be selected.
Device Settings > Installed Memory > 256MB
F-2-1
Quality > Details.. > Resolution : 1200dpi
F-2-2
F-2-3
Finishing > Finishing Details.. > Advanced Settings.. > Specical Fine Line Process