Canon TS6420a Online Manual Download Page 33 | Manualshive

Page: 33 / 439

Canon TS6420a Online Manual Download Page 33

• In Wireless Direct mode, you can connect up to five devices at the same time. If you try to connect a

sixth device while five devices are already connected, an error will appear.
If an error appears, disconnect a device that does not use the printer, then configure settings again.

• Devices connected to the printer using Wireless Direct cannot communicate with each other.
• Firmware updates for the printer are not available while using Wireless Direct.
• When a device has been connected to the printer without using a wireless router and you want to set

it up again using the same connection method, disconnect it first. Disable the connection between the
device and printer in the Wi-Fi setting screen.

33

«
...
31
32
33
34
35
...
»

Summary of Contents for TS6420a
























































































































































































































































































































































































































































Reviews:

No comments