Canon TS6420a Online Manual Download Page 143

Page: 143 / 439

H: Paper Output Support

Open to support ejected paper.

I: Status Bar

Lights or flashes to indicate the printer is operating or when an error occurs.

J: Paper Support

Extend to load paper in the rear tray.

K: Rear Tray Cover

Open to load paper in the rear tray.

L: Paper Guides

Align with both sides of the paper stack.

M: Feed Slot Cover

Prevents anything from falling into the feed slot.

Open it to slide the paper guides, and close it before printing.

N: Rear Tray

Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same
time, and fed automatically one sheet at a time.

Loading Plain Paper / Photo Paper in Rear Tray
Loading Envelopes in Rear Tray

143

Summary of Contents for TS6420a
























































































































































































































































































































































































































































Search results

Summary of Contents for TS6420a

Reviews:

Canon TS6420a, Online Manual, Page: 143 / 439

Search results

Summary of Contents for TS6420a

Reviews: