Canon TM-5300 Online Manual Download Page 359

Page: 359 / 931

Manual Adjustment to Straighten Lines and Colors

If printed vertical lines are warped or colors are out of alignment, execute

Print head alignment

and adjust

the print head position.

Normally, execute

Auto (standard)

Automatic Adjustment to Straighten Lines and Colors

However, when printing on special paper or if printing is not improved after

Auto (fine)

, try

Manual

adjustment requires you to examine the printed test pattern and enter an adjustment value.

Important

• Because the results of adjustment vary depending on the type of paper used for adjustment, use the

same type of paper as you will use for printing.

• When using cut sheets, do not move the release lever until instructions (guidance) for removing the

paper are displayed.

Moving the release lever during printing or maintenance operations will cause the printer to stop.

Paper to Prepare

When using rolls

An unused roll at least 10.00 inches (254.0 mm) wide

When using sheets

Four sheets of unused paper, A4/Letter size or larger (or two sheets when using A2 or larger)

Perform adjustment as follows.

Load paper.

Loading Rolls on the Roll Holder
Loading Rolls in the Printer
Loading Sheets in the Printer

Important

• Always make sure the loaded paper matches the type of paper specified on the printer.

Adjustment cannot be completed correctly unless the loaded paper matches the settings.

Tap

(Setup) >

Maintenance

on HOME screen.

Touch Screen

The

Maintenance

screen appears.

359

Summary of Contents for TM-5300




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TM-5300

Reviews:

Related manuals for TM-5300

Brands by name

Popular brands

Canon TM-5300, Online Manual

Search results

Summary of Contents for TM-5300

Reviews:

Related manuals for TM-5300

Brands by name

Popular brands