16
BEFORE USE
Remote Control
The remote control may be inoperative in the following cases:
• When there is an obstacle between the remote control and main unit.
• When the infrared remote receiver on the main unit is exposed to direct sunlight or
strong light of lighting equipment.
• All operations of the projector can be controlled with the remote control.
• The remote control uses infrared light.
• When you use two projectors at the same time, you can change the channel
settings to prevent the two remote controls from interfering with each other.
(P72)
2
5
3
6
8
9
12
14
15
17
18
21
20
4
7
10
11
13
16
19
1 Infrared Remote Emitter
Sends a signal to the infrared remote
receiver on the main unit.
2 POWER button (P27, 45)
Turns the projector on or off.
3 MENU button (P50)
Displays a menu.
4 COMPUTER-1 button (P28, 46)
Selects the image input from the DVI-I/RGB
IN-1 terminal.
Pressing this button continuously allows you
to select an input signal (DIGITAL RGB or
ANALOG RGB-1).
5 COMPUTER-2 button (P28, 46)
Selects the image input from the RGB IN-2/
COMPONENT IN/RGB OUT terminal.
Pressing this button continuously allows you
to select an input signal (ANALOG RGB or
COMPONENT).
6 VIDEO/S button (P46)
Select the image input from the VIDEO IN
terminal or S-VIDEO terminal.
Pressing this button continuously allows you
to select input signals (VIDEO or S-VIDEO).
Remote Control Operating Range
Point the remote control to the infrared remote
receiver whenever pressing any button. The maxi-
mum operating range is about 5 m (16.4' ) and 30
o
in front of the infrared remote receiver.
Within 5 m (16.4' ) and
30
o
in front of infrared
remote receiver
30
o
5m
(
16.4
'
)
30
o
1
