5
5
Service Mode
Service Mode
5-9
5-9
Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW28
Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW28
■
SSSW-SW25
●
Functional Construction
Bit
Function
1
0
0 transmission telephone number indicated report other party's
caller's
1 not used
-
-
2 not used
-
-
3 not used
-
-
4 not used
-
-
5 not used
-
-
6 not used
-
-
7 not used
-
-
Detailed Discussions of Bit 0
Use it to select the transmission telephone number indicated on the report at the end of
transmission.
caller's number: indicates the telephone number of the caller on the report.
number of other party: indicates the telephone number (CSI signal data) sent from the other
part on the report.
■
SSSW-SW26
●
Functional Construction
Bit
Function
1
0
0 not used
-
-
1 not used
-
-
2 confirmation screen for broadcasting
display
do not display
3 not used
-
-
4 not used
-
-
5 not used
-
-
6 not used
-
-
7 error report at time of transmission
suspension
do not generate
generate
Detailed Discussions of Bit 2
Use it to enable/disable indication of a confirmation message before broadcasting in
consideration of a mistake during input of addresses.
Detailed Discussions of Bit 7
Use it to enable/disable generation of an error report in response to a press on the Stop key
to suspend transmission.
T-5-13
T-5-14
■
SSSW-SW28
●
Functional Construction
Bit
Function
1
0
0 Caller V.8 protocol
NO
YES
1 Called party V.8 protocol
NO
YES
2 Caller V.8 protocol late start
NO
YES
3 Called party V.8 protocol late start
NO
YES
4 V.34 reception fallback
Prohibited
Not prohibited
5 V.34 transmission fallback
Prohibited
Not prohibited
6 not used
-
-
7 not used
-
-
Detailed Discussions of Bit 0
Select whether to use the V.8 protocol when calling. If NO is selected, the V.8 protocol is
inhibited at calling and the V.21 protocol is used.
Detailed Discussions of Bit 1
Select whether to use the V.8 protocol when called. If NO is selected, the V8 protocol is
inhibited when called and the V.21 protocol is used.
Detailed Discussions of Bit 2
Select whether to execute the V.8 procedure in case that the ANSam signal from the
reception side is not recognized when originating a call and the existence of the V.8
procedure is informed with the DIS signal from the reception side.
Yes: Transmit the CI signal in a response to the DIS signal of the originating side, and
execute the V.8 procedure.
No: Without transmitting the CI signal in a response to the DIS signal from the reception
side, execute the V.21 procedure.
In case of the manual transmission, the V.8 late start is not executed regardless of this
setting.
Detailed Discussions of Bit 3
Select whether to inform the existence of the V.8 procedure with the DIS signal that is
transmitted after the ANSam signal in case that the ANSam signal at the reception is not
recognized at the originating side.
Yes: Inform the existence of the V.8 procedure with the DIS signal, and execute the V.8
procedure after transmitting the CI signal by the originating side.
No: Without informing the existence of the V.8 procedure, execute the V.21 procedure.
In case of the manual transmission, the V.8 late start is not executed regardless of this
setting.
T-5-15
Summary of Contents for Super G3 FAX Board-AR1
Page 6: ... Notes Before it Works Serving Safety Precautions ...
Page 8: ...1 1 Product Outline Product Outline Product Outline Specifications ...
Page 10: ...2 2 Technology Technology Technology Basic Construction Controls ...
Page 16: ...4 4 Error Code Error Code Error Code Overview User Error Code Service Error Code ...