Canon Super G3 FAX Board-AR1, Service Manual

Page: 27 / 69

5
5
Service Mode
Service Mode
5-5
5-5
Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW01
Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW01
Setting of Bit Switch (SSSW)
Bit Switch Composition
The registration/setup items of the switch are set according to the positions of its 8 bits; the
bit switch shown on the display is as follows, each bit being either 0 or 1:
SW01 0 0 0 0 0 0 0 0
Bit 7
Bit 0
Caution:
Do not change service data identified as "not used"; they are set as initial settings.
<1/7>
<READY>
Report Sssw Menu Num Ncu Type IPFAX Print Clear Test
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
SW01
SW02
SW03
SW04
SW05
SW06
0 0 0 0 0 0 0 0
1 0 0 0 0 0 0 0
SW07
SW08
OK
F-5-9
F-5-10
■
SSSW-SW01
● Functional Construction
Bit Function 1 0
0 service error code output not output
1 error dump list output not output
2 not used - -
3 not used - -
4 not used - -
5 not used - -
6 not used - -
7 not used - -
Detailed Discussions of Bit 0
Selects whether or not service error codes are output.
When output is selected, service error codes are displayed and in reports.
Detailed Discussions of Bit 1
Selects whether or not error dump lists are output.
When selecting 'output', the error transmission report and the reception result report at the
time of error to which the error dump list is attached are output.
T-5-2