Canon SmartBase PC1270D, Fax Manual, Page: 74 / 88

9-4
FAX SETTINGS
Name Descriptions
USER SETTINGS
The basic operation settings in the Fax mode can be specified.
1.TEL LINE SETTINGS
Specify the telephone line settings.
1.USER TEL NO.
Your telephone and fax number can be registered. (
→
p. 2-4)
2.TEL LINE TYPE
Selects the telephone line type. (
→
p. 2-7)
TOUCH TONE
The telephone line is set for touch tone dialling.
ROTARY PULSE
The telephone line is set for rotary pulse dialling.
3.TX START SPEED
Sets the transmission speed for all documents you send.
14400bps/9600bps/7200bps/4800bps/2400bps
4.RX START SPEED Sets the transmission speed for all documents you receive.
14400bps/9600bps/7200bps/4800bps/2400bps
2.UNIT NAME You can register your name (or your company name). (
→
p. 2-5)
3.TX TERMINAL ID Prints your ID (transmitting terminal ID) on each page you transmit.
(
→
p. 2-3)
ON After you turn the terminal ID ON, you can do the following settings.
1.TTI POSITION OUTSIDE IMAGE : Terminal ID is printed outside the image border.
INSIDE IMAGE : Terminal ID is printed inside the image border.
2.TEL NUMBER MARK Selects the prefix for the identification header number.
FAX , TEL
OFF No terminal ID is printed on the pages you send.
4.DENSITY CONTROL
Sets the density of the documents.
LIGHT
Sets for dark documents.
STANDARD
Sets for the documents of normal density.
DARK
Sets for light documents.
5.PROG 1-TOUCH KEY
Programs a fax function into the One-Touch key. The programmed
fax function will be executed by directly pressing the corresponding
One-Touch key. You do not need to press
Function before pressing
the One-Touch key.
01 - 12
Select the One-Touch key (
01
to
12
) in which you want to program
the fax function.
USE
Uses PROGRAM 1-TOUCH KEY.
The following functions can be programmed:
1.REPORT
;
2.DELAYED TX
;
3.FAX MONITOR
;
4.MEMORY REFERENCE
;
5.BOOK SENDING.
6.D.T.
DO NOT USE
Disables PROGRAM 1-TOUCH KEY.
09_EN.fm Page 4 Tuesday, February 19, 2002 8:38 AM