CHAPTER 2 USING THE MACHINE
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
2-20
3 Service Mode
3.1 Outline
The following items may be checked or set in the machine’s service mode, which consists
of those found in existing fax machines. You may use them as you would on a fax machine.
The machine’s service mode items are grouped into the following 15 blocks:
#1
SSSW: service soft switch
Use it to register/set basic fax functions (e.g., error control, echo remedy, communica-
tion error correction).
#2
MENU: menu switch settings
Use it to register/set items related to functions needed at time of installation (e.g., NL
equalizer, transmission level).
#3
NUMERIC param: numerical parameter settings
Use it to enter a numerical parameter for various functions related to the FAX/TEL
switch-over.
#4A SPECIAL: Do not change.
#4B NCU: Do not change.
This item is set in conjunction with the setting of #5 TYPE so that the settings will
comply with the communications standards of a specific country/region.
#4C ISDN: not used
#5
TYPE: country/region setting
Use it to select a country/region from the list so that the setting of #1 through #4 will
comply with the communications standards of the selected country/region.
#6
SCANNER: partially available for service
Do not change the settings except ‘7: CCD’, used to adjust the image position; other-
wise, the read image quality can adversely be affected.
#7
PRINTER: printer function settings
Use it to register/set items related to printer basic service functions (e.g., conditions for
reducing received images).
#8
PDL: not used
#9
COUNTER: counter information
Use it to check various counter information.
