Canon SmartBase F141400 Fax Manual Download

Page: 67 / 88

8-3

Tro

ubl

esh

ooti

❚

Cannot send using Error Correction Mode (ECM).

The other party’s fax machine may not support ECM.

• If the other party’s fax machine does not support ECM, then the document is sent in normal mode without error checking.

ECM may be disabled.

• Make sure ECM is on. (

→

p. 9-5)

❚

Errors occur frequently while sending.

The telephone lines may be in poor condition, or you may have a bad connection.

• Lower the transmission speed. (

→

p. 9-4)

■

Receiving Problems

❚

Cannot receive a fax automatically.

The machine may not be set to receive automatically.

• For the machine to receive faxes automatically, the receive mode must be set to

FaxTel

FaxOnly

AnsMode

(

→

Chapter

5). If you have set

AnsMode

, confirm that an answering machine is connected to the machine and that it is turned on with an

outgoing message properly recorded. (

→

p. 5-2)

The machine’s memory is full.

• Print out or delete any documents stored in memory (

→

pp. 4-15, 4-16) to free up space in the machine’s memory. Then ask

the other party to resend the fax.

An error may have occurred during reception.

• Print an ACTIVITY REPORT and check for an error. (

→

p. 7-2)

No paper in the cassette.

• Make sure paper is loaded in the cassette. (

→

Quick Start Guide)

The telephone line may not be connected properly.

• Make sure all line connections are secure. (

→

Quick Start Guide)

❚

The machine does not switch automatically between telephone and fax reception.

The machine may not be set to switch automatically between telephone and fax reception.

• For the machine to switch automatically, the receive mode must be set to

FaxTel

AnsMode

(

→

Chapter 5). If you have set

AnsMode

, confirm that an answering machine is connected to the machine and that it is turned on with an outgoing message

properly recorded. (

→

p. 5-2)

An error may have occurred during reception.

• Print an ACTIVITY REPORT and check for an error. (

→

p. 7-2)

No paper may be loaded in the cassette.

• Make sure paper is loaded in the cassette. (

→

Quick Start Guide)

The sending fax machine cannot send the CNG signal that tells the machine that the incoming signal is a fax.

• Some fax machines cannot send the CNG signal that tells your machine the incoming call is from a fax machine. In such cases,

you will have to receive the fax manually. (

→

p. 5-6)

08_EN.fm Page 3 Tuesday, February 19, 2002 8:37 AM

Summary of Contents for SmartBase F141400

























































































Search results

Summary of Contents for SmartBase F141400

Reviews:

Related manuals for SmartBase F141400

Brands by name

Popular brands

Canon SmartBase F141400, Fax Manual

Search results

Summary of Contents for SmartBase F141400

Reviews:

Related manuals for SmartBase F141400

Brands by name

Popular brands