43
Printing without a Power Outlet
To print where no power outlet is available, use Battery Pack NB-CP2L (sold
separately). On a full charge, up to about 36 sheets* of postcard-size paper
can be printed.
*
According to Canon testing. May vary depending on printing conditions.
Attaching the Battery Pack
1
Remove the battery pack
mounting cover.
z
z
With the switch held in the direction of the
arrow ( ), move the cover in the
direction of the arrow (
) to remove.
2
Remove the battery terminal
cover.
3
Attach the battery pack.
z
z
Slide the terminal-end in the direction of
the arrow ( ) and insert the other end
(
) until it clicks into place.
BATT
ERY
Air Vent
Charging the Battery to Use SELPHY
•
Once SELPHY is connected to a power outlet (
), charging starts
and [
] blinks on the screen.
•
When charging is finished in about four hours (at room temperature),
[
] will no longer be displayed.
•
SELPHY can be turned on for use even while [
] is blinking (
).
However, charging will then stop. When power is turned off, [
] blinks
and charging resumes.
•
For battery precautions, refer to the battery user manual.
•
When [
] is displayed, place SELPHY in an environment at operating
temperature (
), and charge once it has adjusted to the ambient
temperature.
•
When [
] is displayed, press and hold any button other than <
q
> for
3 seconds or more to clear [
]. To check if the battery is still charging,
you can press any button other than <
q
>, and [
] will appear for around
10 seconds.
•
When [
] is displayed in red, the battery has reached the end of its life.
Please purchase a new battery.
