manualshive.com logo in svg

Canon Satera LBP7700C, User Manual

Share
Download
Canon Satera LBP7700C User Manual Download Page 31

 

30

 

5

 

Set the paper cassette in the paper feeder.

 

Push it into the printer firmly.

CAUTION

 

Precautions when inserting the paper cassette

 

Be careful not to catch your fingers. 

 

Specifying the Settings for the Paper Cassette

 

This printer's paper cassette (Cassette 2) is configured to automatically detect the 
paper size by default. Therefore, you do not need to change the settings for the 
paper cassette. 
However, you need to change the settings in the following cases.

 

 

When loading standard size paper again after using custom size paper

 

 

When you want to specify [

フリー

 ] which does not check the paper size.

Install the printer, turn it on, and then change the settings for the paper cassette 
using the following procedure.

IMPORTANT

 

Precautions when specifying [

フ

フ

フ

フリ

リ

リ

リー

ー

ー

ー

 ]

 

The printer performs printing without checking the paper settings in the printer driver.
Make sure that the paper specified in the printer driver matches that loaded in the paper 
cassette before using the printer. 

Summary of Contents for Satera LBP7700C









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands