manualshive.com logo in svg

Canon Satera LBP-3910, User Manual, Page: 96 / 97

Share
Download
Canon Satera LBP-3910 User Manual Download Page 96

 

95

16 トナー カクニン

 

Cause

A toner cartridge needs to be replaced soon.

Remedy

Press [

オンライン

 ]. Although you can continue to 

print for a while, have ready a new toner 
cartridge. When you print a large amount of data, 
or white patches appear on the images, replace 
the toner cartridge with a new one. If the printer is 
not online after closing the front cover, press [

オン

ライン

 ].

18 カセット 1 ナシ

 

Cause

Cassette 1 is not set.

Remedy

Set Cassette 1.

18 カセット 2 ナシ

 

Cause

Cassette 2 is not set.

Remedy

Set Cassette 2.

18 カセット 3 ナシ

 

Cause

Cassette 3 is not set.

Remedy

Set Cassette 3.

18 カセット 2 ヨウシオー

バー

 

Cause

The amount of paper loaded in Cassette 2 
exceeds the load limitation.

Remedy

Reduce the amount of paper in Cassette 2.

18 カセット 3 ヨウシオー

バー

 

Cause

The amount of paper loaded in Cassette 3 
exceeds the load limitation.

Remedy

Reduce the amount of paper in Cassette 3.

18 カセット 4 ヨウシオー

バー

 

Cause

The amount of paper loaded in Cassette 4 
exceeds the load limitation.

Remedy

Reduce the amount of paper in Cassette 4.

18 キュウシ エラー

 

Cause

Paper of the size or type that cannot be fed from 
the multi-purpose tray or paper cassettes is 
specified.

Remedy

If a paper source is specified, press [

給紙選択

 ], 

then set <

キュウシモード

 > to <

ジドウ

 >.

1F ハイシトレイ フル

 

Cause

The output tray is full.

Remedy

Remove the paper in the output tray.

1G トナー カクニン

 

<Warning Message>

Cause

The toner cartridge has reached the end of its life.

Remedy

Take the toner cartridge out of the printer and 
replace it with a new one.

1H トナーセツゾクカクニン

 

<Warning Message>

Cause

There is a possibility that the toner cartridge is not 
installed properly.

Remedy

Remove the toner cartridge and reinstall it 
properly.

 

Message

Cause and Remedy

Summary of Contents for Satera LBP-3910


































































































Reviews:

No comments