manualshive.com logo in svg

Canon Satera LBP-3910, User Manual, Page: 95 / 97

Share
Download
Canon Satera LBP-3910 User Manual Download Page 95

 

94

12 カバーガ アイテイマス

 

Cause

The front cover is open, or the sub-output tray is 
open to the position shown in the figure.

Remedy

Close the front cover firmly or close the 
sub-output tray to the position shown in the figure. 
If the printer is not online, press [

オンライン

 ].

13 ヨウシガ ツマリマシタ

 

Cause

Paper is jammed inside the printer.

Remedy

Remove the jammed paper and set the paper 
cassette and covers to the original position. If the 
printer is not online, press [

オンライン

 ].

14 トナー ミソウチャク

 

Cause

The toner cartridge is not installed or installed 
improperly.

Remedy

Install the toner cartridge properly.

16 トナー ヨウイ

 

<Warning Message>

Cause

A toner cartridge needs to be replaced soon.

Remedy

Although you can continue to print for a while, 
have ready a new toner cartridge. When you print 
a large amount of data, or white patches appear 
on the images, replace the toner cartridge with a 
new one. If the printer is not online after closing 
the front cover, press [

オンライン

 ].

 

Message

Cause and Remedy

Summary of Contents for Satera LBP-3910


































































































Reviews:

No comments