Canon S830D - S Color Inkjet Printer User Manual Download

Page: 112 / 201

Envelopes

112

Printing Media

■

• Place envelopes lengthwise with the flap to the left and the address side facing

upwards.

• Set the Paper Thickness Lever to the right.

• Up to 10 envelopes can be loaded at once.

Note

➤

If even after removing any curl in the envelopes they still will not feed
properly, clean the paper feed roller.

Ensure the printer is turned on. If any paper is loaded in the printer,
remove the paper.

Hold down the RESUME/CANCEL button; when the POWER lamp
flashes three times, release the RESUME/CANCEL button.

Paper
Thickness
Lever

Summary of Contents for S830D - S Color Inkjet Printer










































































































































































































Search results

Summary of Contents for S830D - S Color Inkjet Printer

Reviews:

Related manuals for S830D - S Color Inkjet Printer

Brands by name

Popular brands

Canon S830D - S Color Inkjet Printer, User Manual

Search results

Summary of Contents for S830D - S Color Inkjet Printer

Reviews:

Related manuals for S830D - S Color Inkjet Printer

Brands by name

Popular brands