Getting started
With the battery installed in the camera, check that the camera has the
right date and time. If it hasn’t, set the correct date and time.
Caution:
If the battery is left out of the
S110
camera for
extended periods, the date/time may reset. We recom-
mend storing the camera with the battery installed. A
battery with even a small amount of charge will keep the
camera’s internal clock running for extended periods.
To prevent undesired settings changes upon camera insertion into the
drone or during flight, a camera dial lock is attached to the camera by
a strap. Before inserting your
S110
camera into the
eBee
, the camera
dial lock must be placed onto the mode dial and the trigger, as shown
below.
The
S110
camera is directly powered by the
eBee
and the
S110
camera
battery must be removed before plugging it into your
eBee
. All flights
have to be conducted without camera battery for weight reduction and
safety reasons.
With the battery removed and the dial lock in place, insert the
S110
camera into your
eBee
, plug it into the connector (see icon
) and close
the camera’s compartment lid.
18
Summary of Contents for S110 RGB
