Canon REALiS WUX5000 User'S Manual & Installation Manual Download Page 37

Page: 37 / 240

Part Names

Before Use

SHIFT button (

P74

)

Moves the lens up, down, left or right.
[ ] / [ ] / [ ] / [ ] buttons: Move the lens.

INPUT button (

P60

)

Switches the input signal.

MENU button (

P89

)

Displays the menu on the screen. Performs remote control channel settings
when the remote control is used via the infrared transmitter. (

P127

)

VOL button (

P83

)

Adjusts the sound volume.
[3] button: Increases the volume.
[6] button: Decreases the volume.

BLANK button (

P82

)

Toggles between display / non-display of
the image.

AUTO PC button (

P62

)

Adjusts tracking etc. automatically in accordance with the signal from a com-
puter when the analog PC input is selected.

EXIT button (

P92

)

Cancels functions such as menu
display or test pattern during oper-
ation and returns to the image dis-
play.

MUTE button (

P83

)

Mutes the sound.

Change input buttons (

P60

)

Change the input signal between Digital
PC, Analog PC-1, Analog PC-2, HDMI
and Component.

KEYSTONE button (

P76

)

Corrects keystone distortion.
To move the image, use the [ ] / [ ] or [ ] / [ ] buttons.

Fn button

Cannot be used on this
product.

FREEZE button (

P82

)

Freezes the projected image.

Enter password and TCP/IP setting values.

Terminal for wired remote control (

P30

)

Connects a cable to the projector for remote control operation.

Downloaded From projector-manual.com Canon Manuals

Summary of Contents for REALiS WUX5000

















































































































































































































































Search results

Summary of Contents for REALiS WUX5000

Reviews:

Brands by name

Popular brands

Canon REALiS WUX5000, User'S Manual & Installation Manual

Search results

Summary of Contents for REALiS WUX5000

Reviews:

Brands by name

Popular brands