Adjusting the Image
74
Adjusting the Image Position
To adjust the screen position up, down, left, or right, press the
LENS-SHIFT
button
(WUX5000 / WUX4000) or
SHIFT
button
(WX6000 / SX6000)
on the remote control, or the
LENS
button on the projector. This function is referred to as “lens shift”. It can change the
projected screen to the most suitable position by moving the position of the lens up/down/
left/right. (
1
Press either the LENS-SHIFT button (WUX5000 / WUX4000) or the SHIFT button
(WX6000 / SX6000) on the remote control, or the LENS button on the projector 3
times in order to display the window shown below.
* If the Short Fixed Focus Lens (RS-IL03WF) is attached, when the LENS button on
the projector is pressed twice, the window below will be displayed.
• The available range for lens shift (percentage of movement relative to the screen size) var-
ies depending on the lens unit which is used. (
• There are areas where each lens is unable to move. With the Short Fixed Lens (RS-
IL03WF), the areas are at the four corners and for the other lenses, the areas are at the top
left and bottom right. (
)
Push three times*
Remote control
Projector
Remote control
Summary of Contents for REALiS SX6000 Pro AV
