Rayo S1
User Manual
15
Important
• In Projector mode, slide the power switch to the center (OFF), and a confirmation
dialog will appear on the projection screen. Select OK to turn off the power.
• If you select Cancel, you can continue to use Projector mode. When canceled, make
sure to slide the power switch back to Projector Mode.
Note
• If the device is not operating, reset by pressing the Reset button on the rear panel of
the product.
• For more information on resetting, see "Reset" on page 16.
Focus adjustment
Turn the focus adjustment ring clockwise and counterclockwise until the projection
screen becomes clear.
Note
• Gently turn the focus adjustment ring to set the focus. If you exert excessive force on
the focus adjustment ring, it can cause damage or breakage.
• The projection may be out of focus if the projection distance is out of the range.
• The larger the projection distance (distance between the product and the screen),
the larger and darker the screen.
Minimum focus distance
1.5 ft Screen size: About 14 inches
Maximum focus distance
10 ft Screen size: About 84 inches
Recommended projection distance
3 ft Screen size: About 28 inches
Volume button
Adjust the audio volume with the volume button (+, -). When you press the volume
button while using the device, the volume status is displayed on the screen so you
can adjust accordingly.
