Canon Puncher Unit-L1, Service Manual

Page: 43 / 92

Chapter 3
3-5
F-3-16
4) Disconnect the connector [1] and remove the screw
[2], and remove the horizontal registration home
position sensor [3].
F-3-17
5) Turn the gear [1] in the direction of the arrow, and
move the punch unit section [2] to the far side.
F-3-18
6) Remove the tie wrap with lock [1] while holding its
claw between your fingers. (The tie wrap must be
removed without being cut.)
7) Disconnect the three connectors [2] and remove the
screw [3], and remove the harness guide [4].
F-3-19
8) Lift up the front side of the punch unit section [1]
first, then move in the direction of the arrow to remove
the punch unit section [1].
[2]
[1]
[3]
[2]
[1]
[2]
[4]
[3]