Canon PowerShot SD750 User Guide Advanced User Manual Download

Page: 63 / 163

Shoo

tin
g

The Color Accent mode will take effect.

The camera will switch to color input

mode and the display will alternate
between the original image and the
color accent image (using the previ-
ously set color).

Aim the camera so that the color you wish
to retain appears at the center of the LCD
monitor and press the

button.

Only one color can be specified.

You can use the

button to specify the range of col-

ors that are retained.
• -5: Only takes the color that you want to retain
• +5: Also takes colors close to the one that you want to

retain

Press

to complete the setting, then

shoot.

The default color accent is green.

You may not obtain the expected results if you use the flash.

The specified color accent and color range is retained even
if the camera's power is turned off.

Summary of Contents for PowerShot SD750 User Guide Advanced




































































































































































Search results

Summary of Contents for PowerShot SD750 User Guide Advanced

Reviews:

Related manuals for PowerShot SD750 User Guide Advanced

Brands by name

Popular brands

Canon PowerShot SD750 User Guide Advanced, User Manual

Search results

Summary of Contents for PowerShot SD750 User Guide Advanced

Reviews:

Related manuals for PowerShot SD750 User Guide Advanced

Brands by name

Popular brands