Canon PowerShot SD750 User Guide Advanced Page 121 User Manual Download

Page: 121 / 163

T
roub

lesh

oot

ing

119

Lens will not retract.

Memory card slot/battery
cover was opened with
power on.

First close the memory card slot/

battery cover and then turn the
power on and then off again. (

Basic

Guide

p. 7).

Shooting Movies

The recording time may not display properly or
shooting may stop unexpectedly.

The following types of
memory cards are used.

- Slow recording cards.
- Cards formatted on a

different camera or a
computer.

- Cards which have had

images recorded and
erased repeatedly.

Although the recording time may not

display properly during shooting, the
movie will be recorded correctly on
the memory card. Recording time
will display properly if you format the
memory card in this camera
(excluding slow recording memory
cards) (p. 29).

"!" displayed on the LCD monitor in red and
shooting automatically stopped.

There is insufficient free
space in the camera's
built-in memory.

Try the following procedures.

- Format the card with a low level

format before shooting (p. 29).

- Lower the recording pixels or

frame rate (p. 42).

- Use a high-speed memory card

(SDC-512MSH, etc.).

Zoom does not operate.

Zoom lever was pressed
while shooting in movie
mode.

Operate the zoom before shooting in

movie mode (

Basic Guide

p. 15).

Note the digital zoom is available
while shooting, but only in Standard
movie mode (p. 32).

Summary of Contents for PowerShot SD750 User Guide Advanced




































































































































































Search results

Summary of Contents for PowerShot SD750 User Guide Advanced

Reviews:

Related manuals for PowerShot SD750 User Guide Advanced

Brands by name

Popular brands

Canon PowerShot SD750 User Guide Advanced, User Manual

Search results

Summary of Contents for PowerShot SD750 User Guide Advanced

Reviews:

Related manuals for PowerShot SD750 User Guide Advanced

Brands by name

Popular brands