Canon PowerShot SD750 User Guide Advanced Page 115 User Manual Download

Page: 115 / 163

113

T
roub

lesh

oot

ing

Troubleshooting

Camera

Camera will not operate.

Power is not turned on.

Press the power button (

Basic Guide

p. 11).

Memory card slot/battery
cover is open.

Confirm that the memory card slot/

battery cover is securely closed
(

Basic Guide

p. 7).

Battery charge insufficient
to operate camera
("Change the battery
pack" message displays).

Insert a fully charged battery into the

camera (

Basic Guide

p. 7).

Use the AC Adapter Kit ACK-DC10

(sold separately) (p. 131).

Poor contact between
camera and battery
terminals.

Polish the terminals with a soft

cotton swab before charging or
using the battery (p. 127).

Sounds come from the camera interior.

The camera's horizontal/
vertical orientation was
changed.

The camera's orientation

mechanism is operating. There is no
malfunction.

When the power is turned on

"Card locked!" message appears.

The SD memory card's
and SDHC memory
card's write protect tab is
set to "Write protect".

When recording to, erasing from or

formatting the memory card, slide
the write protect tab upward (p. 129).

The Date/Time menu appears.

The built-in rechargeable
lithium battery charge is
low.

Recharge the built-in battery

immediately (

Basic Guide

p. 9).

Summary of Contents for PowerShot SD750 User Guide Advanced




































































































































































Search results

Summary of Contents for PowerShot SD750 User Guide Advanced

Reviews:

Related manuals for PowerShot SD750 User Guide Advanced

Brands by name

Popular brands

Canon PowerShot SD750 User Guide Advanced, User Manual

Search results

Summary of Contents for PowerShot SD750 User Guide Advanced

Reviews:

Related manuals for PowerShot SD750 User Guide Advanced

Brands by name

Popular brands