Wireless Network Settings for the Computer and Camera
18
3
After you have selected a target device, select
[Connect].
The name registered for the target device in Step
11 (p. 12, 14) in
Registering the Target Device
with the Camera
will appear in the [Target Device]
category.
4
Press the
button (or FUNC./SET button).
The wireless lamp and
button will blink
while the two devices connect.
The LCD monitor will display an indicator that
shows the connection status.
Wait until the wireless lamp stops blinking and
lights steadily and an antenna showing the signal
strength (0-3 bars) appears on the LCD monitor.
• The connection may take some time to establish if there are many images in
the camera.
• Do not perform the following procedures on the computer during a wireless
connection:
* Shut down, log out or restart the computer system
* Close the Camera Control Window
Before attempting any of the above procedures, first use the camera to
disconnect from the wireless connection (p. 19).
• Unless you change the target device, you can connect later simply by
pressing the
button in Step 2 for one second.
• If an error message displays on the camera's LCD monitor, see
Connection
Difficulty
in the
Software & Wireless Guide
(p. 100).
Button
FUNC./SET
Button
In Playback Mode