17
Connecting
Connect to the computer using the camera controls.
You will not require an interface cable because you are connecting wirelessly.
Connect after you have registered the target device (computer) according to the procedures in
Registering the Target Device with the Camera
(p. 9).
1
Turn on the camera and set it to the playback
or shooting modes.
Playback Mode
After connecting, you can download camera
images to the computer and print them on a
printer.
Shooting Modes
After connecting, you can transmit a recorded
image immediately to the computer.
See
Actions Possible with the Camera Connected to a Computer
(p. 21) for details.
2
Press the
button.
A menu for selecting the target device will appear
on the LCD monitor.
The
button will light blue.
• The wireless networking function can be operated up to approximately 30
meters away with a direct line of sight to the target device. However, this
distance will depend upon the operating conditions.
• You cannot have more than one camera connected at a time.
•You cannot connect to multiple target devices at once. If you are already
connected to one device and attempt to connect another, the current
connection will close and the camera will begin to connect to the new target
device.
• Always use the camera to disconnect from a wireless connection (p. 19).
•
The movie mode cannot be used over a wireless connection.
• You can switch between the playback and shooting modes during a
wireless connection.
Alternatively, you can display the menu for selecting the target device by
pressing the MENU button, selecting the [
(Wireless)] menu followed
by the [Connect/Disconnect] option, and pressing the FUNC./SET button.
Power Button
Playback
Mode or
Shooting
Modes
Button
FUNC./SET
Button
MENU
Button