Canon Powershot SD3500 IS Getting Started Download Page 147

Page: 147 / 219

111

Checking the Focus

You can magnify the area of a recorded image that was inside the AF
Frame, or the area of a face that was detected, to check the focus.

Touch

to switch the focus

check display (p. 43).

A white frame will appear where the AF
frame or face was when the focus was
set.

A gray frame will appear on a face
detected during playback.

The area within the orange frame appears
magnified.

Switch frames.

●

Move the zoom lever toward

once.

The screen shown to the left will appear.

●

Touch

to move to a different frame

when multiple frames appear.

Change the magnification level or
location.

●

Moving the zoom lever, or touching the
magnified image at the bottom right of the
screen, or

will change the

displayed magnification rate.

●

If you drag across the image on the lower
right, you can move the location of the
displayed area.

●

Touching

, or the image in the upper left

resets the display to Step 1.

Summary of Contents for Powershot SD3500 IS




























































































































































































































Search results

Summary of Contents for Powershot SD3500 IS

Reviews:

Related manuals for Powershot SD3500 IS

Brands by name

Popular brands

Canon Powershot SD3500 IS, Getting Started

Search results

Summary of Contents for Powershot SD3500 IS

Reviews:

Related manuals for Powershot SD3500 IS

Brands by name

Popular brands