Canon Powershot SD3500 IS Getting Started Download Page 114

Page: 114 / 219

Continuous Shooting

You can shoot continuously at a maximum speed of approximately 0.7
images/second while the shutter button is pressed fully and held.

Choose a Drive mode.

●

Touch

, then drag vertically up or

down the menu on the left to choose

Choose an option.

●

Touch

●

Touch

again to make the setting.

Once set,

will appear on the screen.

Shoot.

As long as you hold the shutter button
down, the camera will shoot successive
images.

•

Cannot be used with the self-timer (pp. 68, 80, 81) or

(pp. 60 – 62).

•

Continuous shooting speed increases in

(p. 55).

•

For a certain interval, images may not be recorded, and the shooting
speed for may slow down depending on the shooting conditions and the
camera settings.

•

For continuous shooting, the focus and exposure are locked when the
shutter button is pressed halfway.

•

As the number of images increases, the shoo ing speed may slow
down.

•

If the flash fires, the shooting speed may slow down.

Summary of Contents for Powershot SD3500 IS




























































































































































































































Search results

Summary of Contents for Powershot SD3500 IS

Reviews:

Related manuals for Powershot SD3500 IS

Brands by name

Popular brands

Canon Powershot SD3500 IS, Getting Started

Search results

Summary of Contents for Powershot SD3500 IS

Reviews:

Related manuals for Powershot SD3500 IS

Brands by name

Popular brands