Canon PowerShot S95 Page 185 Getting Started Download

Page: 185 / 301

Printing Images

149

Choose an image to print.

●

Press the

buttons or turn the

dial to

choose an image.

Print images.

●

Press the

button.

Printing will start.

●

If you want to print additional images,

repeat Steps 5 and 6 after printing has

completed.

●

After printing has completed, turn off the

camera and printer, and unplug the

interface cable.

•

Refer to the

Personal Printing Guide

for details on prin ing.

•

Refer to p. 40 for Canon-brand Pictbridge compliant printers.

•

Index printing (p. 151) is not available on certain Canon-brand
PictBridge compliant printers (sold separately).

•

RAW images cannot be printed.

Summary of Contents for PowerShot S95














































































































































































































































































































Search results

Summary of Contents for PowerShot S95

Reviews:

Related manuals for PowerShot S95

Brands by name

Popular brands

Canon PowerShot S95, Getting Started

Search results

Summary of Contents for PowerShot S95

Reviews:

Related manuals for PowerShot S95

Brands by name

Popular brands