Canon PowerShot S95 Getting Started Download

Page: 164 / 301

Changing Image Transitions

128

Choose an image.

●

Press the

opqr

buttons to choose the

image you want to view next.

The chosen image will be displayed in the

middle, and the next four poss bilities will

appear.

●

Pressing the

button will display the

middle image at full size. Press the

button again to restore the original display.

You can also use the zoom lever.

●

Pressing the

button restores single

image playback.

You can choose from three transition effects when switching between images
in single image playback.

Choose [Transition].

●

Press the

button to choose

[Transition] in the

tab, then press the

buttons to choose a transition effect.

•

Only still images shot with this camera will play back in Smart Shuffle.

•

[

Smart Shuffle] is not available in the following situations:

If there are less than 50 images taken with this camera on the memory card.

If you play back images not supported by Smart Shuffle.

During filtered playback.

Changing Image Transitions

Summary of Contents for PowerShot S95














































































































































































































































































































Search results

Summary of Contents for PowerShot S95

Reviews:

Related manuals for PowerShot S95

Brands by name

Popular brands

Canon PowerShot S95, Getting Started

Search results

Summary of Contents for PowerShot S95

Reviews:

Related manuals for PowerShot S95

Brands by name

Popular brands