Canon PowerShot G2 (PC1015) Reference Manual Download Page 63

Page: 63 / 163

Shooting - Selecting Particular Effects

Program AE

Use the program AE mode to have the camera automatically set the shutter speed
and aperture settings to match the brightness of the scene.

Turn the mode dial to .

Shoot the image.

• The shutter speed and aperture settings will be

set automatically and shown in the display
panel. They will also appear in the LCD monitor
if it is on.

• The correct exposure has been set if the shutter

speed and aperture settings do not blink in the
display panel.

• If a correct exposure cannot be obtained, the shutter speed and aperture settings

blink in the display panel and show in red in the LCD monitor. Use the following
methods to shoot.

- Use the flash.
- Adjust the exposure using spot metering, exposure compensation or flash

exposure compensation.

- Switch the shooting mode to (Manual).

Differences and Similarities between the and

Modes.

• Both modes automatically select the shutter speed and aperture settings.
• The following settings can be adjusted in mode, but not in

mode.

- Exposure Compensation

- White Balance

- AEB Mode

- Flash Exposure Compensation

- Built-In Flash (Red-Eye Reduction On / On)
- Continuous Mode

- File Format Settings

- Image Adjustment (ISO Speed, Contrast, Sharpness and Saturation) Settings
- Light Metering Method

- Manual Focus

- AF Frame

- AE Lock

- FE Lock

Summary of Contents for PowerShot G2 (PC1015)




































































































































































Search results

Summary of Contents for PowerShot G2 (PC1015)

Reviews:

Related manuals for PowerShot G2 (PC1015)

Brands by name

Popular brands

Canon PowerShot G2 (PC1015), Reference Manual

Search results

Summary of Contents for PowerShot G2 (PC1015)

Reviews:

Related manuals for PowerShot G2 (PC1015)

Brands by name

Popular brands