Canon PowerShot G12 Page 66 Getting Started Download

Page: 66 / 255

Viewing Movies

●

Do not touch the microphone while

shooting.

●

Do not press any buttons other than the

shutter button while shooting. The sound the

buttons make will be recorded in the movie.

Stop shooting.

●

Press the shutter button fully again.

The camera will beep once and stop

shooting the movie.

The movie will record to the memory card.

Shooting will automatically stop when the

memory card fills.

Estimated Shooting Times

•

Shooting times are based on default settings.

•

Recording will automatically stop when either the clip file size reaches 4 GB or the
recording time reaches approximately 29 min. 59 sec.

•

Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.

You can view the movies you have shot on the screen.

Enter Playback mode.

●

Press the

button.

The last image you took will appear.

appears on movies.

Microphone

Magnifying the subject while shooting

Pressing the zoom lever toward

will zoom in on the subject. However,

operation sounds will be recorded and the movie may appear coarse.

Memory Card

4 GB

16 GB

Shooting Time

25 min. 08 sec.

1 hr. 42 min. 57 sec.

Viewing Movies

Summary of Contents for PowerShot G12
































































































































































































































































Search results

Summary of Contents for PowerShot G12

Reviews:

Related manuals for PowerShot G12

Brands by name

Popular brands

Canon PowerShot G12, Getting Started

Search results

Summary of Contents for PowerShot G12

Reviews:

Related manuals for PowerShot G12

Brands by name

Popular brands