Canon PowerShot G12 Page 157 Getting Started Download

Page: 157 / 255

121

You can lock the exposure or change it in 1/3 steps within a range of ±2 before
shooting.

Focus.

●

Press the shutter button halfway to focus.

Lock the exposure.

●

After releasing the shutter button, press

the

button to lock the exposure. The

exposure shift bar appears.

●

Press the

button again to release the

lock.

Change the exposure.

●

While watching the screen, turn the

dial

to adjust the exposure.

Shoot.

Wind Filter suppresses noise when the wind is strong. However, unnatural
sound may result when used to record in locations with no wind.

●

Press the

button to choose [Wind

Filter] in the

tab, then press the

buttons to choose [On].

AE Lock/Exposure Shift

Using the Wind Filter

Summary of Contents for PowerShot G12
































































































































































































































































Search results

Summary of Contents for PowerShot G12

Reviews:

Related manuals for PowerShot G12

Brands by name

Popular brands

Canon PowerShot G12, Getting Started

Search results

Summary of Contents for PowerShot G12

Reviews:

Related manuals for PowerShot G12

Brands by name

Popular brands