Canon PowerShot G12 Page 57 Getting Started Download

Page: 57 / 255

You can change the language that displays on the screen.

Enter Playback mode.

●

Press the

button.

Display the settings screen.

●

Press and hold the

button, then

immediately press the

button.

Set the display language.

●

Press the

opqr

buttons or turn the

dial to choose a language, then press the

button.

Once the display language has been set,

the settings screen will close.

Setting the Display Language

What if the clock appears when the

button is pressed?

The clock will appear if too much time passes between pressing the

button

and the

button in Step 2. If the clock appears, press the

button to

remove the clock and repeat Step 2.

You can also change he display language by pressing the

button,

choosing the

tab, and choosing he [Language] menu item.

Summary of Contents for PowerShot G12
































































































































































































































































Search results

Summary of Contents for PowerShot G12

Reviews:

Related manuals for PowerShot G12

Brands by name

Popular brands

Canon PowerShot G12, Getting Started

Search results

Summary of Contents for PowerShot G12

Reviews:

Related manuals for PowerShot G12

Brands by name

Popular brands