17
2.15 LCD UNIT SECTION
(1) Remove two screws (
c
×
1,
i
×
1).
(2) Disconnect the two connectors.
(3) Disengage the dowel, and remove the LCD UNIT SECTION.
<Note on Reassembling>
Be careful not to forget to engage the dowel.
Make sure to handle the flexible board with a pair of tweezers only at the area circled in the diagram, because it
is thin and easy to damage.
After connecting the flexible board, be sure that it is inserted firmly into the connector.
XA1-7170-257
2.5mm
SILVER
M1.7
c
XA1-7170-357
3.5mm
SILVER
M1.7
i
(3)
Connectors
(2)
Dowel
Flexible board
(3)
LCD UNIT SECTION
<Note on Reassembling>
<Note on Reassembling>
(1) -
i
(1) -
c
